Air handling unit

 Air handling unit

Air handling unit is an important equipment in the pharmaceutical industry. It is used to control the environment inside the cleanroom. The process of handling air in pharmaceuticals is critical to ensuring the quality and safety of the products being manufactured. In this article, we'll take a look at how air handling units work in pharmaceuticals to ensure that the products being made meet the highest standards. 

The Principle and Working of Air Handling Units Air handling unit is an important equipment in the pharmaceutical industry. It is used to control the environment inside the cleanroom. The unit can be used to adjust the temperature, humidity and air pressure. It also filters the air to remove contaminants. The working principle of the air handling unit is based on the laws of thermodynamics and fluid dynamics. 

The unit uses a fan to draw air from the outside and then passes it through a series of filters. The air is then cooled or heated as required and passed into the cleanroom. The air handling unit is an important part of the pharmaceutical production process. It is used to control the environment inside the cleanroom. The unit can be used to adjust the temperature, humidity and air pressure. It also filters the air to remove contaminants. Air handling unit (AHU) is one of the major components of a pharmaceutical plant. 

AHU plays a vital role in controlling air quality and regulating temperature in the manufacturing process. The working process of an AHU in a pharmaceuticals plant can be divided into three main phases: startup, operation, and shutdown. 

In the startup phase, 

an AHU’s filters and fans are initially activated to achieve desired air quality and temperature. This process typically takes about 15 minutes. Once the AHU is initialized, it begins running continuously until it is shut down or restarted. During startup, the plant’s ventilation system must be adjusted to accommodate the new AHU operations. 

The operation phase 

of an AHU involves running the fans and filters at specified speeds to regulate airflow and temperature. The goal of this phase is to maintain consistent air quality and temperature throughout the manufacturing process. During operation, the plant’s ventilation system must also be constantly adjusted to accommodate changes in AHU output. 

The shutdown phase 

of an AHU involves deactivating all fans and filters so that the plant can return to its original ventilation settings. This process typically takes about 5 minutes. Once the shutdown is complete, the plant’s ventilation system must be adjusted again to accommodate new AHU operations.

 Air Handling Units are crucial in pharmaceutical manufacturing, as they are responsible for distributing air throughout the plant. Air handling units work by delivering a steady stream of air to specific areas, regulating the temperature, and filtering out contaminants. 

Comments

Post a Comment

Popular posts from this blog

Paracetamol

  PARACETAMOL Paracetamol, also known as acetaminophen and APAP, is a medication used to treat pain and fever. in India, it is available as Brand Name- CALPOL CROCIN T-98   and other It is typically used for mild to moderate pain relief. There is mixed evidence for its use to relieve fever in children. It is often sold in combination with other medications, such as in many cold medications. WINCOLD SUMOCOLD VODACOF HATRIC3 and others Paracetamol is also used for severe pain, such as  cancer pain  and pain after surgery, in combination with  opioid pain medication . It is typically used either by mouth or  rectally , but is also available by  injection into a vein . Effects last between 2 to 4 hours. Paracetamol is generally safe at recommended doses. The recommended maximum daily dose for an adult is 3 or 4 grams. \ Higher doses may lead to toxicity, including  liver failure . Serious skin rashes may rarely occur. It appears to be safe d...
Read more

CALCULATION OF F0 VALUE AND TEN’S POWER

Image
  F0 Value (Equivalent Exposure Time) F0 value is the equivalent exposure time at 121.1°C to that of the actual exposure time at a variable temperature calculated with a temperature coefficient of the destruction of 10°C. F0 Value Definition F0 Value (Equivalent Exposure Time) where, Δt – the time interval between two temperature readings T – the temperature at time t of the product under sterilization z – temperature coefficient (assumed as 10°C) The term next to Δt in equation (2) is called Lethality Rate. You can calculate it individually or by averaging complete sterile hold data, the result will be equivalent. Testing F0 Value And Its Meaning Consider sterilization hold time of 30 min. at constant 121.1°C. Put this in equation (2), Solving we get, F0 = 30 min. ( This is an ideal condition for steam sterilization ) But what if the temperature is increased or decreased from 121°C (ideal condition)? Let...
Read more